Installation planning
Use approved drawings to set support locations and maintain consistent alignment. Confirm that fittings do not create sharp edges and that the route leaves adequate space for pulling, cleating, inspection and future expansion.
Open support for heavier cables
Ladder cable tray uses side rails and cross members to create an open, serviceable route. The format is well suited to power cables, long runs and projects where heat dissipation, inspection and access are important.
For a reliable selection, review cable weight, support span, deflection limits, bend radius, separation requirements and the environmental exposure. Yanggang can coordinate straight sections, bends, tees, crosses, reducers, covers and splice hardware for a complete route.
| Typical width | 150, 225, 300, 450, 600, 750 or 900 mm commonly specified |
|---|---|
| Side rail height | 100, 125, 150 or 180 mm reference options |
| Rung spacing | 150, 225 or 300 mm common options, selected for cable support and installation access |
| Material thickness | 1.5, 2.0 or 2.5 mm reference options, subject to load and span |
| Straight section | 3,000 or 6,000 mm common project lengths |
| Materials and finish | Pre-galvanized steel, hot-dip galvanized steel, stainless steel or aluminum |
| Fittings | 30, 45, 60 or 90 degree bends, tees, crosses, reducers, covers and splice plates |
Specification note: These are common reference ranges from comparable international ladder tray series, not a final quotation. Confirm final dimensions, load, support span, deflection and finish with Yanggang before ordering.
Get a project quote
Provide the cable list, route length, desired finish and destination country. We can help prepare a tray and fitting schedule for your review.
Request ladder tray pricingFrequently Asked Questions
When should I choose ladder cable tray?
Ladder cable tray is commonly considered for heavier power cables, longer runs and installations where airflow, inspection and cable access are important.
Which ladder tray accessories are available?
Typical accessories include bends, tees, crosses, reducers, covers, splice hardware and supports. The fitting schedule can be coordinated with the route drawings.
How is ladder tray capacity selected?
Selection should consider cable weight, support span, deflection limits, bend radius, separation requirements and the environmental exposure of the installation.